021-2420 9396
808/980nm 1×2 Fused WDM
808/980nm Fused Wavelength Division Mulitplexer is a fiber component built with FBT technology, it can be used to sepreate or combine 808nm and 1050nm wavelength signal, it's widely used in Fiber Laser Systems and Fiber Amplifier Systems, the high power type is available upon request.
Application: | Features: |
Fiber Laser EDFA Optical Diffraction System Lab And Research | Epoxy Free High Isolation Low Insertion Loss Optical Path Reversibility |
Specifications
Parameters | Unit | Values |
Wavelength | nm | 808/980 |
Bandwidth | nm | 808±5/980±5 |
Max. Insertion Loss | dB | 0.5 |
Min. Isolation | dB | 18 |
Max. Polarization Dependent Loss | dB | 0.15 |
Min. Directivity | dB | 55 |
Min. Directivity | dB | 50 |
Max. Optical Power (CW) | W | 2 |
Max. Tensil Load | N | 5 |
Fiber Type | - | HI 780 or HI 1060 Fiber |
Operating Temperature | °C | -40 to 85 |
Storage Temperature | °C | -40 to 85 |
Package Dimension | mm | Φ3.0×L54 |
Notice: Above specifications are tested at center wavelength without connector in room temperature @23℃.
For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, Connectors only 1W CW optical power guarantee.
Ordering Information
FUWDM-①①①①-②②-③③-④-⑤-⑥⑥-⑦⑦
①①①① | ②② | ③③ | ④ | ⑤ | ⑥⑥ | ⑦⑦ |
Wavelength | Port | Fiber Type | Package Dimension | Fiber Jacket | Fiber Length | Connector |
0876 - 808/976nm 0880 - 808/980nm | 12 - 1×2 22 - 2×2 | H7 - HI 780 H1 - HI 1060 SS - Specify | 1 - Φ3.0×L54mm A - 90x20x10mm S - Specify | B - 250um Bare Fiber 9 - 900um Loose Tube 2 - 2.0mm Loose Tube 3 - 3.0mm Loose Tube | 05 - 0.5m 10 - 1.0m 15 - 1.5m 20 - 2.0m SS - Specify | NE - None FA - FC/APC FU - FC/UPC SA - SC/APC SU - SU/APC LA - LC/APC LU - LC/UPC SS - Specify |
